Toyota RAV4 Bolt Pattern (Explained)  

Toyota RAV4 Bolt Pattern It is very confusing to work to put new wheels in your vehicle because there are a lot of different kinds of wheel measurements on the market.  

Of all these, the most important and essential one is the bolt pattern in wheel measurement. If you put it wrong or there is some kind of mistake you made, then forget that your new wheel is attached to your car.  (Source)

In this guide, we will make it very simple to explain what the Toyota RAV4 bolt pattern is and, if you put it wrong, what will happen.  

Toyota RAV4 Bolt Pattern (Explained) 

Recommended Guide Toyota RAV4 Brake Fluid (Complete Guide)  

Toyota RAV4 Bolt Pattern Specification  

The Toyota RAV4 bolt pattern depends on what model you are driving, but the most common Toyota RAV4 bolt pattern is 5 x 114.3. It means there are five lugs or bolts on your vehicle. and the diameter of the circle they form when measured from the center of the wheel is 114.3 millimeters (about 4.5 in).  

Definition of Bolt Pattern  

The Toyota RAV4 bolt pattern is commonly known as the lug pattern. It is the first and main thing that will determine if a new wheel will fit in your SUV or not. That is how the holes in the middle of a wheel are put in order.  

For the Toyota RAV4 bolt pattern number 5, the first numbers show how many bolt holes are in the wheel.  

You will find in your tire the holes, which are circles in the middle of the wheel. It will always be measured in inches or millimeters for the Toyota RAV4 bolt pattern, which is 4.5 inches and 114.3 millimeters.  

4.5 inches and 114.3 millimeters

Some bolt patterns are the same, just a millimeter apart, but they look different, like 5×4.5 (5×114.3mm) and 5x115mm.  

If you think the half-millimeter won’t matter, then my friend, you are wrong. It does matter, even if the smaller wheel fits on the larger bolt on the car it won’t fit. Studs will not be in the center, so if you tighten the nuts, they will bend and make the wheels shake.  

As an expert in Toyota, I will recommend that you properly check the bolt pattern before purchasing a new wheel.  

Why It’s Important  

You probably wonder why it is so important. I will tell you why, when you go and purchase a new tire, you must check that its bolt pattern is the same, or else it won’t fit on your car.  

You can easily determine bolt patterns in many cars, like the 4-lug wheel, which is much easier to measure than the 5-lug wheel.  

Sometimes it will get tricky to measure when some numbers have odd numbers, like 5×4.5. In this case, contact your local dealership.  

But you don’t have to worry; most retailers and Toyota dealerships know the proper bolt pattern size for vehicles.  

If you DIY, you must know the right size bolt pattern; otherwise, it will never fit.  

Conclusion  

The Toyota RAV4 bolt pattern is very important for your car’s wheels. If you are purchasing new wheels, you must know the right size bolt pattern; otherwise, they will never attach to your car.  

It depends on car models, but the most common ones that are used are 5×4.5 inches and 5×114.3 millimeters.  

You don’t have to worry about the fact that most retailers and Toyota dealerships know the proper size of bolt patterns on vehicles.  

FAQS (Frequently Asked Questions)

What is the bolt pattern on a 2007 Toyota RAV4?

Commonly every RAV4 is a 5×114.3 bolt pattern

What rims will fit a RAV4?

The rims of RAV4 depend on which model are you driving but in most of them its 16 inches to 19 inches.

What does RAV4 mean?

It means recreational active vehicle with 4wd

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *