Toyota RAV4 Auto LSD Light: Explained

The Toyota RAV4 auto LSD light issue is not a common issue compared to other car issues. Toyota comes with different light warnings to let us know the problem. It is not found on every vehicle

In this further guide, I’ll tell you what an auto LSD light is. How to turn it on and off to take total control of it. And what will you do if there is a malfunction?

Recommended Read Toyota Charging System Malfunction Warning (Debunked)

Toyota RAV4 Auto LSD Light Understanding Auto LSD

TRAC Off mode was activated whenever Auto LSD went on. It’s simple: if one of your wheels is spinning automatically, then an auto LSD break applies to that wheel. And when pressure or torque goes onto the other wheel, it will secure balance and driving power.

If you drive in a snowy or muddy area, then the control is totally off, and your tire is spinning.
In any case, if your SUV has a limited-slip differential, most of the time when the wheel is spinning, it helps you keep going.

Auto LSD vs. Traditional LSD

I must say that the Toyota RAV4 Auto LSD Light is like a limited-slip differential, but not the same. It’s shocking that it doesn’t use differential or transmission.
Auto LSD works exactly like (LSD) Limited Slip Differential; it will stop the spinning and return to traction by applying the brakes. It is called the anti-brake system (ABS).

LSD is a gear system that gives power from the engine to the wheels. It has clutches and springs between the axles to regulate the power passing around.
When one wheel is rotated differently than another, torque shifts to the other wheel, where more traction is needed.

When to Use It

Here are some points where Auto LSD will be a handful.

• Snowy tracks where there is no traction at all
• Muddy areas
• Very bumpy roads
• If your car is stuck in the ditch,

MODEL AVAILABILITY

How do you know whether there is LSD or auto LSD?

Model Year Range	Auto-LSD Availability	Limited-Slip Differential (LSD) Availability
2006-2018	Available	Not Available

You can also go to the Toyota manual guidelines and check to see what system you have.

How to Toggle On/off

It’s simple if you want to turn on auto LSD, the first thing to be done is to turn off the vehicle stability control and traction. If you have any difficulties, check the manual. It’s simple: press the VSC button off. Once done, the notification will display on the instrument cluster.

Toyota RAV4 Auto LSD Light comes on, and you will see that they are activated. When you are done using auto-LSD, just press the VCS off button. The lights will disappear on the instrument cluster.

Sometimes it will automatically turn off, when the brake gets too hot, the auto LSD will turn off. When it cools down, the system automatically turns on. The same goes for the engine if you shut it off. It will remain off unless you turn back on the auto-LSD.

Troubleshooting Problems

The Toyota RAV4 Auto LSD Light is on, the tire is slipping and spinning, and the light is blinking. This is a normal system; you don’t have to worry about it.
However, you didn’t turn on the auto LSD, and still, the light is blinking, which means there is something wrong. It may be stuck, which means there is a malfunction.

You need to stop the vehicle immediately, or else more damage will occur. Go to the safest location, turn off the engine, and try to restart again.

If the problem is still there, you need to contact your dealership. Let professionals handle this; otherwise, it will create a new problem.

Conclusion

All Toyota new model auto LSD It’s a very good and reliable technology. It helps you in a harsh environment. It will prevent accidents and make your life easier. My advice is that if anything happens to your auto LSD system, go to a professional immediately.

Don’t risk it; I will fix it tomorrow. I don’t have time now, so excuses might be very dangerous.
Think about it, and don’t risk your life.

FAQs (Frequently Asked Questions)